The date of payment from buyers deliver within days
By certification [File Integrity]
Master Deer Cut-Off Wheels General Purpose – flat/depressed – steel
Abrasive: Aluminum oxide A-Medium-hard, multipurpose tool of hardness T with high cutting performance and long tool life.
Choose the wheel according to your practical application.
Applications: Cutting of sheet metal, profiles and solid material.
Available in a range of sizes and thickness.
Wheel thickness1.1mm/1.5mm/1.8mm/2mm 2.4 mm for multipurpose cutting work
Wheel thicknesses 3.2/3.0 mm for maximum tool life and high lateral stability.
Suitable for use on angle grinders of all output categories.
Best Choice for 3 Advantages:
- Excellent resin bonded agent, safe, good sharpness and strength, especially suitable for high power angle grinder.
- Reinforced mesh discs, tight combination with net and abrasive materials, high properties with cutting and bending strength.
- Suitable for all kinds of metal, ss, steel, alloyed steel
Frequently asked questions and solution for cutting wheel:
The cutting wheel consumption fast
The hardness level of wheel is low
Select and adopt the models with high hardness level
The grinding pressure is too huge
Decrease the grinding pressure
The inner bores of cutting disc craze
The cutting disc gets stuck in the work piece
Move forward and backward evenly, and exert pressure along the diametrical direction
The cutting disc is used to grinding
Use the grinding disc in grinding process
The pressure of side direction is too huge
Avoid the flange plate with the same diameter in inner side and outside
The diameter of inner side and outside is inconsistent
Apply the flange plate with the same diameter in inner side and outside
The edge crazes while the abrasion wheel is cutting
The diameter of the flange plate is too small
Replace the flange plate with large diameter and generally the diameter of flange plate should be required to reach 1/3 of that of the abrasion wheel
The loading pressure of the flange is so huge that the flange edge of abrasion wheel of deforms
Adjust the pressure of the flange and abrasion wheel to reasonable level
It is used with improper force while cutting
Decrease the load while cutting and reduce the pressure in side direction
The fracture of work pieces is burnt severely
The hardness level of abrasion wheel is over high
Adopt the abrasion wheel of low hardness level and high efficiency
The work rate of the equipment is low
Replace it with high work rate
The belt of the cutting machine is loose
Adjust the tightness of the belt