Product Details
Integrated Electromagnetic Flow Meter
Integrated Electromagnetic Flow Meter is a new type liquid flow meter, the display part and the measure part are integrated which can read the flow data on the screen of the flow meter.It is widely used in the fields of petroleum, chemical industry, metallurgy, light spinning, paper making, environmental protection, food and other industrial sectors, municipal administration, water conservancy construction, river dredging and other fields.
Measure Medium |
Water,Sewage,Acid,Alkali,Slurry,Milk |
Nominal diameter |
15-500mm |
Degree of accuracy |
±0.5%R |
Medium conductivity |
≥5uS/cm,Actual conductivity≥30uS/cm |
Nominal pressure |
1.0MPa |
1.6MPa |
2.5MPa |
4.0MPa |
DN15-DN500 |
DN15-DN500 |
DN15-DN500 |
DN15-DN50 |
Highest medium temperature |
Compact type |
+80℃ |
Remote type |
CR chloroprene rubber liner (CR) |
+80℃ |
Polytetrafluoroethylene lining(F4) |
+120℃ |
Politef lining(F46) |
+120℃ |
Teflon(PFA) |
+180℃ |
Fluorosilicone rubber(FVMQ) |
+250℃ |
Output signal |
4-20mA;Pulse/Frequency 2kHz(Default),5KHz(Max) |
Supply voltage |
110/220VAC(100-240VAC),50Hz/60Hz;24VDC ±10% |
Communication |
RS-485,Support standard Modbus-RTU protocol;GPRS |
Electrode material |
Stainless steel 316L,Hastelloy C,Hastelloy B,titanium, tantalum, platinum |
Level of protection |
Remote type |
IP68,IP65 |
Compact type |
IP65 |
How to choose the measuring range and caliber of electromagnetic flow meter
Electromagnetic Flowmeter is a kind of flow meter with high precision, high reliability and long service life, so we pay attention to every link in the process of designing product structure, material selection, making process, production assembly and factory test.
We have also designed a set of the most advanced production equipment and flow calibration device specially used for electromagnetic Flowmeter in China, so as to ensure the long-term high quality of the product in both software and hardware.
The electromagnetic Flowmeter specially designs a Chinese liquid crystal display with backlight width and temperature, which has complete and practical functions, intuitionistic display, convenient operation and use, and can reduce the inconvenience caused by the English menu of other electromagnetic Flowmeter.
The caliber of the transmitter usually chooses the same caliber as the pipeline system. If the pipeline system is to be designed, the caliber can be selected according to the flow range and velocity. For the electromagnetic Flowmeter, the velocity of flow is more suitable for 2-4m/s. In special cases, if there are solid particles in the liquid, the optional commonly used velocity is ≤ 3 m ≤ s, for the fluid that is easy to be managed. The flow rate ≥ 2m/s can be selected.
The measuring range of the transmitter can be selected according to two principles: one is that the full range of the instrument is greater than the expected maximum flow value; the other is that the normal flow rate is greater than 50% of the full range of the instrument to ensure a certain measurement accuracy.
Performance characteristics of intelligent electromagnetic flow meter:
The measurement accuracy is not affected by the change of fluid density, viscosity, temperature, pressure and conductivity, and the sensor induced voltage signal is linear with the average flow rate, so the measurement precision is high.
http://www.en-acemeter.com/